Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya IP Phone behind Site to Site VPN

Status
Not open for further replies.

Barahm

Technical User
Jan 3, 2019
34
CA
Hi,
I am trying to have Avaya IP Phone registered behind a site to site VPN. I can see the phone is successful in getting the FW and send the registration request to the IPO but the IPO sends Unregister request to the phone which makes the phone to go an infinite reboot loop.
See the traces below: 192.168.50.10 is the IPO LAN2, 192.168.100.111 is the IP Phone

2019-02-20T13:10:44 518884780mS PRN: CDR - TCPSend maxqueuesize=500 framecount=0 operational=1
2019-02-20T13:10:45 518885160mS RasRx: v=IFace=LAN2, Src=192.168.100.111:49300, Dst=192.168.50.10:1719 peb=0
RasMessage = gatekeeperRequest

2019-02-20T13:10:45 518885195mS RasRx: v=IFace=LAN2, Src=192.168.100.111:49300, Dst=192.168.50.10:1719 peb=0
RasMessage = registrationRequest

2019-02-20T13:10:45 518885195mS H323Evt: Recv: RegistrationRequest 192.168.100.111; Endpoints registered: 74; Endpoints in registration: 0
2019-02-20T13:10:45 518885195mS H323Evt: e_H225_AliasAddress_dialedDigits alias
2019-02-20T13:10:45 518885196mS H323Evt: found number <12345>
2019-02-20T13:10:45 518885196mS H323Evt: RRQ --- CallSigProtocol is H323AnnexL_P. Go for Avaya 4600IP phone
2019-02-20T13:10:45 518885197mS H323Evt: RRQ --- Register extn 12345 using product IP_Phone, version 6.3116
2019-02-20T13:10:45 518885200mS RasTx: v=Src=192.168.50.10:1719, Dst=192.168.100.111:49300 peb=0
RasMessage = registrationConfirm

2019-02-20T13:10:45 518885161mS H323Evt: Recv GRQ from c0a8646f
2019-02-20T13:10:45 518885162mS H323Evt: e_H225_AliasAddress_dialedDigits alias
2019-02-20T13:10:45 518885162mS H323Evt: found number <12345>
2019-02-20T13:10:45 518885162mS RasTx: v=Src=192.168.50.10:1719, Dst=192.168.100.111:49300 peb=0
RasMessage = gatekeeperConfirm

2019-02-20T13:10:45 518885195mS RasRx: v=IFace=LAN2, Src=192.168.100.111:49300, Dst=192.168.50.10:1719 peb=0
RasMessage = registrationRequest

2019-02-20T13:10:45 518885195mS H323Evt: Recv: RegistrationRequest 192.168.100.111; Endpoints registered: 74; Endpoints in registration: 0
2019-02-20T13:10:45 518885195mS H323Evt: e_H225_AliasAddress_dialedDigits alias
2019-02-20T13:10:45 518885196mS H323Evt: found number <12345>
2019-02-20T13:10:45 518885196mS H323Evt: RRQ --- CallSigProtocol is H323AnnexL_P. Go for Avaya 4600IP phone
2019-02-20T13:10:45 518885197mS H323Evt: RRQ --- Register extn 12345 using product IP_Phone, version 6.3116
2019-02-20T13:10:45 518885200mS RasTx: v=Src=192.168.50.10:1719, Dst=192.168.100.111:49300 peb=0
RasMessage = registrationConfirm


019-02-20T13:11:15 518915257mS H323Evt: GK: Unregister endpoint CPPAvaya_5c6d51d5378d3a45 for extension 12345 reason 3
2019-02-20T13:11:15 518915258mS H323Evt: GK: Send URQ
2019-02-20T13:11:15 518915258mS RasTx: v=Src=192.168.50.10:1719, Dst=192.168.100.111:49300 peb=0
RasMessage = unregistrationRequest

Any idea what is going on??
The same is phone is successful in registering if it is on the same IPO LAN.
 
Having the same issue with a phone on one of my systems with no resolution yet "GK: Unregister endpoint CPPAvaya_5c6d51d5378d3a45 for extension 12345 reason 3" seem that it keeps requesting to unregister.
Mike
 
Thanks. What system version are you using there?
 
Mine is 8.1.
Do you the version is the issue?
If I put the phone on the same LAN network where the IPO is then no issues.
 
mine is on the same LAN no VLAN involved. It just keeps unregisteing and having the reason 3.
Mike
 
Did you add a IP route? If not, create one.

IP Route:

IP Address 192.168.100.0
IP Mask 255.255.255.0
Gateway IP Address 192.168.50.1

Set the Destination to the LAN your IPO camps out on.

Also program your phones with 192.168.100.XXX and the router as 192.168.50.1

Hope this helps!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top