Avaya IP office v1 slowly Dieing power supply

[djkyle65]

Hello,

I was looking for some advice. I have an Ip office 500 v1 with a dieing power supply. What does everyone recommend as the best lowest cost way to move forward? I know avaya doesn't sell replacement parts which is disappointing especially for power supplies and the v1 is no longer being made.

Should I pickup another used v1 or go with the v2?

Im worried that if I go with the v2 my licenses will no longer be valid and the conversion will be troublesome.

I currently have the following licenses:

Voicemail Pro (4 Ports)
SoftConsole (users)
IP500 VCM Channels
IP500 Upgrade Standard to Professional
eBLF


Thanks for your advice!

Kyle

 

[IPGuru]

Your system should be able to replace the IP500 V1 form their maintenance stock (You do have a maintenance contract with a competent maintainer don't you?)

if you have to go it alone then you will need to buy an IP500V2 + SD card, the licenses from your old smart card can me swapped to the SD card & the old smart card will need to be returned for destruction (or you will have to pay for the licenses).


A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear

 

[djkyle65]

No we do not have a maintenance contract. Everything is done in house for the phone system.

 

[tlpeter]

Replace it with an IP500v2 if possible.


BAZINGA!

I'm not insane, my mother had me tested!

 

[smokinjoe2938]

you still could go to the secondary market and purchase a v1 new

acss sme acis sme acss cm 5.2.1 acss cm and cmm acss aura messaging.