I have a IPO 500V2 version 9.1 with a UC module. The customer changed the login password and does not remember what it was. I reset the voicemail password in the security settings in Manager but its did not work letting me into the UC module through the web page or the vmpro client. I rebooted it as well still unable to get into it. Voicemail service is running but since the password will not take affect all the vm channels are tied up and voicemail is down. Is there another way to do this remotely or is having someone onsite HDMI with a monitor and keyboard directly into the only option to reset it?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Avaya IP Office UC Module 9.1 unable to reset login password
- Thread starter JustinIPO
- Start date
- Thread starter
- #2
I also attached a monitor and keyboard to the UC module but tried all the root credentials to login and still unable to login.
Tried username:root
Passwords: Administrator, Administrator!,root01,rootroot,craft01 none would let me login. Any ideas on how to login via HDMI console to the UC Module?
Tried username:root
Passwords: Administrator, Administrator!,root01,rootroot,craft01 none would let me login. Any ideas on how to login via HDMI console to the UC Module?
If you don't have any passwords, then re-imagining is the only way
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
- Status
Similar threads
