Avaya IP Office and H.323 Trunk

[SMagy78]

Hi All ..

I have Configured an H.323 IP Trunk from IP Office to ISTP, when I Call through this line, the caller ID of this line appears as digits like 04101, is there a configuration in the Manager to program any unknown number to appear when I call from this line beacause the service provider give me an outgoing line not incoming .

thanks you ..

 

[intrigrant]

What do you want, change the send number from IP Office?
You need to give the line a unique Outgoing line ID and add a shortcode somewhat like this (example!):
SC = 8N; (= to dial by the user )
TN = NW or Ns1234 (= to send to the line, W = No CLI send, sCLI to send )
Line ID = the above setup outgoing line ID
Action = Dial

This works on ISDN lines and to my believe it will work on H.323 lines as well but only if SCN is disabled.

If it ain't dutch it ain't much

 

[SMagy78]

Hi ..

Yes I need to Send a number from IP Office when I Calling from this IP Trunk like for example (5503224)
sorry but i dont understand this :

TN = NW or Ns1234 (= to send to the line, W = No CLI send, sCLI to send )

can you help me to understand, and am use ARS to dial not SC.

Thanks Alot .

 

[SMagy78]

Hi ....

Any Help Sir .

 

[intrigrant]

In ARS you also use the same shortcodes!

System shortcode:

SC = 8N
TN = .
Action = dial
Line ID = 50:Main

In ARS Main
SC = 8N;
TN = NW or Ns<CLI to send>
LineId = outgoing line ID of the H.323 trunk

Piece of cake huh?

If it ain't dutch it ain't much

 

[SMagy78]

Hi ...

I do it, but now the number apppear when i call drom it to my mobile is Unavailable.

in the ARS this is my configuration

code : 077xxxxxxx
TN : 9077N
Feature : Dial
LineID : 17

when I change the TN to number as you suggest i cant dial
i configure a new SC like this

SC : 9077N
feature : Dial
TN : Ns5503224
line ID : 17

is this correct , if not please tell me again how to config its important for me to finish this and to send this number through this line ,,

thanks