Avaya IP Office 9.1 + SNMP MIB

[Sam Fakhreddine]

Hello,

Trying to monitor IPO with PRTG. The problem is the MIBs that are supposed to be for monitoring SNMP don't seem to exist on the system.

----------------------- New Test -----------------------
Paessler SNMP Tester 5.2.3 Computername: OTC-L0122 Interface: 192.168.70.65
2018-05-24 5:00:58 PM (22 ms) : Device: 192.168.0.200
2018-05-24 5:00:58 PM (31 ms) : SNMP V1
2018-05-24 5:00:58 PM (39 ms) : Custom OID 1.3.6.1.4.1.6889.2.2.1.2
2018-05-24 5:00:58 PM (52 ms) : SNMP Datatype: ASN_NULL
2018-05-24 5:00:58 PM (61 ms) : -------
2018-05-24 5:00:58 PM (71 ms) : Value: NULL2
2018-05-24 5:00:58 PM (80 ms) : Done


----------------------- New Test -----------------------
Paessler SNMP Tester 5.2.3 Computername: OTC-L0122 Interface: 192.168.70.65
2018-05-24 5:01:05 PM (21 ms) : Device: 192.168.0.200
2018-05-24 5:01:05 PM (29 ms) : SNMP V1
2018-05-24 5:01:05 PM (39 ms) : Walk 1.3.6.1.4.1.6889.2.2.1.2
2018-05-24 5:01:05 PM (51 ms) : Error: 2

It seems that the OIDs are not on the system.

Has anyone had success with this OID? I would like to monitor for when the SMTP link fails.

 

[anderson_STN28]

Did you ever have any luck with this? I'm in the same boat with an IP500 I want to monitor and when I walk 1.3.6 it stops at 1.3.6.1.4.1.6889.2.2.1.1.1.1.1.2.1.11.8

Everything after that does not exist. Which isn't helpful since everything I need is in 1.3.6.1.4.1.6889.2.2.1.2