Houdini9881
Technical User
I have an environment with an IPO 11.1.3 with 30+ Phones
Set up with DHCP Client. (It was like that out of box so I left it that way)
I have IPO Lan 1 connected to my POE with all of the Phones.
I have 3 J169's Connected through one of their switches and a Patch cable in the switch room to my POE.
All Phones have been configured and working perfectly, but 5 J129 Phones. I am struggling to find the correct way to configure them properly. Lan 1 is 192.168.1.125. I am later adding SIP Trunks and DID's but I am currently using Analog Lines.
Is there a better way to configure this system for near future migration that has very few limitations?
what is the best way to configure the J129 Phones?
I toggled all the Phones, I believe with the exception of the 3 using their switch to DHCP off. (no dark scale in toggle area)
Please advise and thanks in advance!
Set up with DHCP Client. (It was like that out of box so I left it that way)
I have IPO Lan 1 connected to my POE with all of the Phones.
I have 3 J169's Connected through one of their switches and a Patch cable in the switch room to my POE.
All Phones have been configured and working perfectly, but 5 J129 Phones. I am struggling to find the correct way to configure them properly. Lan 1 is 192.168.1.125. I am later adding SIP Trunks and DID's but I am currently using Analog Lines.
Is there a better way to configure this system for near future migration that has very few limitations?
what is the best way to configure the J129 Phones?
I toggled all the Phones, I believe with the exception of the 3 using their switch to DHCP off. (no dark scale in toggle area)
Please advise and thanks in advance!