Superguppie
Technical User
Hey ,
Ive finally got a ip500, , ive shot the old config from a 03 in it , and the bri's function great.
However ,
All ip lines wont connect.
for example, when i call 444 , it goes to a functioncode 444, dail , phone . line 9
In lines , i've configure line 9 to connect to 201.1.99.1
on the 201.1.99.1 side , ive got an ipo 403 , with fetches it and puts it to phone 444
calling from the ipo 500 TO and FROM via the bri goes great, but as i said , calling to a number via the ip trunk goes badly, it gives a no netline error, if i CALL from another system to the specified IPO500 ip adress, it goes silent for a LONG time , and then goes into in busy status
Could anyone give me a hint for this ?
the config works fine on 100 + machines ?
Superguppie
Ive finally got a ip500, , ive shot the old config from a 03 in it , and the bri's function great.
However ,
All ip lines wont connect.
for example, when i call 444 , it goes to a functioncode 444, dail , phone . line 9
In lines , i've configure line 9 to connect to 201.1.99.1
on the 201.1.99.1 side , ive got an ipo 403 , with fetches it and puts it to phone 444
calling from the ipo 500 TO and FROM via the bri goes great, but as i said , calling to a number via the ip trunk goes badly, it gives a no netline error, if i CALL from another system to the specified IPO500 ip adress, it goes silent for a LONG time , and then goes into in busy status
Could anyone give me a hint for this ?
the config works fine on 100 + machines ?
Superguppie