Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
avaya consoles
- Thread starter dbrehaut
- Start date
I have this as a working KLUGE. I assigned a extension of 00. The extension 00 is xported 2500 and forwarded to the listed directory number of the next site. This works well for a two site DCS arrangement. The 0 for the local attendant and 00 for the other. If I ever add a third site with attendant 01 will be assignedm and forwarded to the LDN.
Hope this helps
ED
1a2 to ip I seen it all
Hope this helps
ED
1a2 to ip I seen it all
Hi,
I had a client who had the same situation.
We got round it by implementing tenant partitioning. There were two floors each with an attendant console. By putting them into partitiions, anyone that pressed 0 would go to the console on their floor.
This way everyone could still press 0 and get to the right console.
Cheers
I had a client who had the same situation.
We got round it by implementing tenant partitioning. There were two floors each with an attendant console. By putting them into partitiions, anyone that pressed 0 would go to the console on their floor.
This way everyone could still press 0 and get to the right console.
Cheers
- Status
Similar threads
