Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

avaya communicator logout automatically

Status
Not open for further replies.

AT08

Programmer
Aug 11, 2015
50
IN
Respected all ,
I hope all of u good.
i need ur help
On a customer site :

Hardware =(1) avaya R220 server (R 9.1.6)
(2) avaya ipocc (9.1.6)
(3) avaya ipocc user interface(R 9.1.6)
(4) avaya communicator (R 2.0.3.44)
(5) avaya switch 24 port 3526D
on the same pc also the CRM , SAP also working

problem = avaya communicator agent is logout automatically .
plz help
its urgent
 
Are they logged out from the Communicator or IPOCC?

"Trying is the first step to failure..." - Homer
 
hi janni78
logged out from communicator
 
That doesn't seem right, I don't have any issues on my system with the same setup.

Do a monitor trace and post it if you don't see anything obvious, that should tell why.

"Trying is the first step to failure..." - Homer
 
hlo janni sir ,
i m sending the monitor treace and also the list of those user which logout

list is :151,111,117,143,144

Trace is :
[ATM]
atmcmline=0
atmchannel=0
atmio=0
[Call]
cm=0
MonIVRMessage=0
cmcallpkt=0
cmcallevt=1
cmextntx=1
cmextnrx=1
cmshortcodemsgs=0
cmextntxc=0
cmextnrxc=0
cmextnevt=1
cmextncutevt=0
cmlinetx=1
cmlinerx=1
cmlineevt=0
cmcalldelta=1
cmextntxp=1
cmextnrxp=1
cmmap=1
mediamaplevel=2
cmtargetting=1
cmlogging=1
cmembeddedvmail=0
cmevmaudioresp=0
cmevmrecorder=0
cmevmhousekeeping=0
cmevmflashstorage=0
cmevmsilence=0
cmevmemail=0
cmport=0
cmprimitive=0
cmfaststartinfo=0
cmars=1
cmlrq=1
cmacdevents=0
cmipdectevents=0
cmipdectmessages=0
cmipdecttxextn=0
cmipdectrxextn=0
cmipdecttxline=0
cmipdectrxline=0
cmsortIEs=1
voiplevel=2
primlevel=2
cmcdr=0
cmcdrextended=0
[Trace Flags]
tapievents=1
tapicalllogevents=1
tapilineevents=1
igmpevents=0
tftpevents=0
tftpwarningevents=0
tftpdownloadevents=0
dnsevents=0
dhcpevents=0
telnetevents=0
cstaevents=0
mhevents=0
voipevents=0
primevents=0
chevents=0
ssevents=0
siptxevents=1
siprxevents=1
h323summary=0
cm_delta2=0
pcvmail=0
pcvmailmsg=0
http=0
siptxnotify=0
siprxnotify=0
sipregrx=0
sipregtx=0
sipcallrx=0
sipcalltx=0
sipmiscrx=0
sipmisctx=0
filesys=0
time=0
memcardcmd=0
smtp=0
outdialer=0
webservices=0
[Performance Data]
MonSysOpMessage=0
MonPerformanceData1=0
MonPerformanceData2=0
MonPerformanceData3=0
MonPerformanceData4=0
MonPerformanceData5=0
MonPerformanceData6=0
MonPerformanceData7=0
MonPerformanceData8=0
MonPerformanceData9=0
MonPerformanceData10=0
MonPerformanceData11=0
MonPerformanceData12=0
MonPerformanceData13=0
MonPerformanceData14=0
MonPerformanceData15=0
MonPerformanceData16=0
MonPerformanceData17=0
MonPerformanceData18=0
MonPerformanceData19=0
MonPerformanceData20=0
MonPerformanceData21=0
MonMemoryData1=0
MonMemoryData2=0
MonMemoryData3=0
MonMemoryData4=0
MonMemoryData5=0
MonBufferData1=0
MonBufferData2=0
MonBufferData3=0
MonSipTCPUsers=0
MonTCPStreams=0
MonTCPStreams2=0
[DTE]
dtecmdtx=0
dtecmdrx=0
dteflttx=0
dtefltrx=0
dteppptx=0
dteppprx=0
dtev120tx=0
dtev120rx=0
dtev110tx=0
dtev110rx=0
dteevents=0
dtcommsstatus=0
dtl2=0
[EConf]
ecdaemon=0
ecapi=0
ectargets=0
ecconf=0
ecvmail=0
ecvmtx=0
ecvmrx=0
[Frame Relay]
frevenm=1
frtxm=0
frrxm=0
frmgmtm=1
[GOD]
godclienttx=0
godclientrx=0
godservertx=0
godserverrx=0
[H.323]
h323tx=1
h323rx=1
h323ev=1
h245tx=1
h245rx=1
rastx=1
rasrx=1
h323fs=1
ccmstx=1
ccmsrx=1
h323whole=1
[SIP]
siptrunkdata=0
siptrunkinfo=1
stuninfo=1
d100info=0
siplevel=0
siprxhex=0
siptxhex=0
sipipfilter=
[HTTP]
httpipfilter=
[Interface]
ifacename=
ifacetx=0
ifacerx=0
ifacerem=0
natinfail=0
natoutfail=0
natin=0
natout=0
firewallallowedout=0
firewallallowedin=0
firewalltcpallowedout=0
firewalltcpallowedin=0
firewalludpallowedout=0
firewalludpallowedin=0
firewallgenericout=0
firewallgenericin=0
firewallfailout=0
firewallfailin=0
ifacequeue=1
filtipsource=
filtipdest=
filtmacsource=
filtmacdest=
filttcpsrcport=0
filttcpdstport=0
filtudpsrcport=0
filtudpdstport=0
iftcp=1
ifudp=1
filtbcast=0
filtplsize=32
ifarpallow=1
ifWAN3pkts=0
ifmcast=1
[Routing]
iproutename=
iprouteev=0
iproutetable=0
iproutetableev=0
iprouteripin=0
iprouteripout=0
[ISDN]
isdnport=0
isdnl1tx=0
isdnl1rx=0
isdnl1ev=1
isdnl2tx=0
isdnl2rx=0
isdnl2ev=1
isdnl3tx=0
isdnl3rx=0
isdnl3ev=1
isdnb1tx=0
isdnb1rx=0
isdnb2tx=0
isdnb2rx=0
[Key/Lamp]
klAppearance=0
klAppearanceGroup=0
klCall=0
klFacility=0
klLocalAppearance=0
klPhoneStateChange=0
klSwitchHook=0
klUserConfig=0
klCallInterface=0
klKeyResolver=0
klCallInterfaceLevel2=0
klKeyResolverLevel2=0
klExcludeClassAdapter=0
klExcludeClassPhone=0
klExcludeClassAppearance=0
klExcludeClassAppearanceGroup=0
klExcludeClassAppearanceSelector=0
klExcludeClassRinger=0
klExcludeClassSwitchHook=0
klExcludeClassCall=0
klExcludeClassLine=0
klExcludeClassPrimaryCoverageFacility=0
klT3ApiEvent=0
klT3ApiMessage=0
klT3PhoneModel=0
[LDAP]
ldaptx=0
ldaprx=0
ldapev=0
directoryev=0
[PPP]
pppiptx=0
pppiprx=0
ppplcptx=0
ppplcprx=0
ppplcpecho=0
pppsectx=0
pppsecrx=0
pppipcptx=0
pppipcprx=0
pppbacptx=0
pppbacprx=0
pppccptx=0
pppccprx=0
pppstack=0
ppplink=0
ppperrmsg=1
pppgenmsg=0
pppmlcptx=0
pppmlcprx=0
ppplinktx=0
ppplinkrx=0
pppiphctx=0
pppiphcrx=0
pppcrtptx=0
pppcrtprx=0
[R2]
MonR2Line=1
MonR2Channel=1
MonR2Dialler=1
MonR2DSP=1
MonR2CAS=1
[Services SNMP]
snmprxmsgpro=0
snmptrapgen=0
snmpvarbindpro=0
[System]
systemerror=1
systemprint=1
systemresource=1
systemlicencing=1
systemdevtrace=0
systemdevtracedefault=1
systemcopylogging=0
showdate=0
showtime=1
showms=1
datetimeprints=0
[T1]
MonT1Line=0
MonT1Channel=0
MonT1Dialler=0
MonT1DSP=0
MonT1CAS=0
MonCSULineLoopback=0
MonCSUPayloadLoopback=0
MonCSULoopbackOff=0
MonCSULoopbackLine1=0
MonCSULoopbackLine2=0
MonCSULoopbackLine5=0
MonCSULoopbackLine6=0
MonCSULoopbackLine9=0
MonCSULoopbackLine10=0
MonCSULoopbackLine13=0
MonCSULoopbackLine14=0
[VPN]
vpnrip=0
vpnnode=0
vpnremotes=0
vpnforwards=0
vpnriptx=0
vpnriprx=0
vpntftptx=0
vpntftprx=0
ipsecevent=0
ipsecrx=0
ipsectx=0
ipsecWarning=0
ipsecDataEv=0
ipsecDecode=0
ipsecDebug=0
ipsecSubtending=0
l2tpevent=0
l2tprx=0
l2tptx=0
sslvpnConfiguration=0
sslvpnSession=1
sslvpnSessionState=1
sslvpnFsm=0
sslvpnSocks=0
sslvpnSocksState=0
sslvpnHeartbeat=0
sslvpnKeepalive=0
sslvpnSignalingPktRx=0
sslvpnSignalingPktTx=0
sslvpnDataPktRx=0
sslvpnDataPktTx=0
sslvpnTunnelInterface=0
sslvpnTunnelRoutes=0
secEvents=0
secMeasurements=0
secStackTrace=0
secRegsCmdInit=0
secRegsCmdDone=0
secRegsCmdError=1
[WAN]
wanport=0
wantx=0
wanrx=0
wanev=1
[SCN]
CtlStreamTx=0
CtlStreamRx=0
DHGRoute=0
HGE=0
HGLII=0
HGSC=0
HGCFG=0
ScnUsers=0
ScnDump=0
ScnResilience=0
[SSI]
ssiStartOfRequestedData=0
ssiRequestMessages=0
ssiReplyAndEventMessages=0
ssiObjectEventMessages=0
triggerlog=
triggerprint=
triggerstringautoro=0
triggerstringmultiro=0
ssiDecode=0
[Jade]
MapperInfo=0
MapperLevel=2
SIPHandlerInfo=0
SIPHandlerLevel=2
RemoteMapperInfo=0
RemoteMapperLevel=2
MSMLInfo=0
MSMLLevel=2
RxFromJade=0
TxToJade=0
RxFromVmPro=0
TxToVmPro=0
MSMLRx=0
MSMLTx=0
InternalSIPFilter=0
UDPSocks=0
TCPSocks=0
[Media]
RTPFilterInfo=0
PriorityQueueInfo=0
FECInterruptInfo=0
RTPMonitorInterval=60
 
That's not the trace, that's a list of the trace settings.

"Trying is the first step to failure..." - Homer
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top