Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya Communicator for Windows through SBC

Status
Not open for further replies.

pkdev

Technical User
Oct 14, 2010
273
FR
Hi everyone,

Does someone already manage to get ACW working through SBC using SIPS ?
It works without TLS.
But with TLS, it connects and then disconnect a few seconds later.
I went through logs but I can't figure out why it doesn't work !
 
Unfortunately cannot help as we decided to go with a different SBC provider which we havent worked out how to do one-x through yet, so we just use really odd ports :)

| ACSS SME |
 
What version of SBC you are running? You need to install certificates in the SBC both the IPO root CA plus the SBC certificates signed by IPO.
 
 
I'm running 7.1SP2.
My onex-mobile works fine with SIPS and SRTP.
My issue is only on Communicator for Windows
 
Have you tried running traceSBC inthe SBC and register Avaya Communicator? From there you should see what’s going on if the client attempts to register to the IPO via the SBC. You can also include capturing SIP and TLS Handshake in the trace. If I remember it right there is also a specific version of AC supported on IPO.

The only difference with non TLS setup is the certificate so please check as well the cert in your windows PC if the IPO root CA is installed.
 
 D
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top