Avaya CM Linux Shell Commands - No Echo

[simreal]

thread690-1456215

I am having the same issue reported in the thread I referenced above. It occurs when I either use the "go shell" command or telnet directly to shell for a linux command prompt. I see the command prompt but when I type I do not see what I'm typing until after I hit enter.

I tried all of the offered solution in the referenced thread but none of them work.

Any ideas?

This is an Avaya CM 5.2.1 running on a S8800 pair.

Simreal@CM-S8800-2> swversion
Operating system: Linux 2.6.18-128.AV07PAE i686 athlon
Built: Aug 19 04:58 2009

Contains: 02.1.016.4
CM Reports as: R015x.02.1.016.4
CM Release String: S8730-015-02.1.016.4

UPDATES:
Update ID Status Type Update description
------------------------------- ------------ ------- ---------------------------
02.1.016.4-18576 activated cold patch 18576 for 02.1.016.4


Platform/Security ID Status Type Update description
------------------------------- ------------ ------- ---------------------------


CM Translation Saved: 2011-08-23 22:00:31

CM License Installed: 2011-08-15 07:51:14

CM Memory Config: Extra Large


- Miguel

A very wise and well respected man once told me "Shut Up!".

 

[simreal]

Nobody has seen this? Can I get a little help?


- Miguel

A very wise and well respected man once told me "Shut Up!".