Avaya AVP 8.0 & R630 Server

[DTGMI]

Our tech is loading AVP 8 on an Avaya R630 server.

The kickstart goes correctly and the AVP 8 DVD is accessed and loads the SW properly ... we are watching it on the monitor.

After the DVD disk ejects and the server reboots .... we are getting a "no OS loaded" error?

Checked the BIOS and all looks fine ...

First time we have run into this issue loading AVP 7 or 8?

Any ideas?

Thanks!

 

[dleuen]

It sounds like it is installing to something other than the first hard disk (like the usb stick). You could boot the install DVD into the "No USB avaya-avp Installer" option if you have access to the console. It will then go through the normal ESXi screens and you can see if your disks show up as a target for installation. If you don't see the hard disk there then there is some BIOS or hardware problem preventing the installer from seeing them. You can also press "Alt-F12" during the install and monitor the logs to look for errors and installation location.