Avaya 5410D won't upgrade to new firmware

[Ronnin]

Hello everyone,

I know this is a long ...old shot but it worth a try.
Got an old IP403 Office DT ver 3 (580).
Manage to reset it to initial state then upgrade it to ver 3
Got a phone to test it Avaya 5410D but when I plug it in .... please wait ......
I read EVERY post regarding 5410 in this forum I did everything following those posts .... no luck
I try with Ip office 5,6 and 9 ..... as soon as i plug it in it say Please Wait .....
5410D REL:2.00 9/21/04 on top
The LED on unit port are not even lit when plug it in but time to time flash the green ones on some of the ports.
I can get the config file and send it back can monitor the tftp can access the unit via DTM ... but i cannot upgrade the damn evil phone.
I run windows 8 on the pc that using Ip office.

If any of you have any idea ... i will really appreciate it.
Ill gladly supply any info regarding the system is required.

Thank you very much in advance,
Andrew

 

[amriddle01]

DT is digital terminal, 5410s are DS (digital station) phones, they're totally incompatible with DT ports

 

[Ronnin]

Right ....... simple
Thank you so much. So the only phones I can use on that unit are 2000 series ...right ?


Thank you,
Andrew

 

[AACon]

Those used the old 2030 phones, the INDeX ones, if I remember correctly (the 20 series). It's been...a while.

-Austin
ACE: Implement IP Office

 

[Ronnin]

Thank you.
Can it be upgraded with a DS extension module so the DS phones be supported ?

Andrew

 

[AACon]

nah

-Austin
ACE: Implement IP Office

 

[intrigrant]

Hi Andrew,

You can add upto three DS expansionboxes to the IP403DT like a IP400 DS8, 16 or 30.
They are still for sale as used products, a example here:

http://www.ebay.com/itm/Avaya-IP400...ne-System-Control-Unit-PCS04-V1-/191155786392

 

[AACon]

I don't know what I was thinking. I kept thinking small office, but yeah, intrigrant is right. UHG this cold medicine is making me all wonky.

-Austin
ACE: Implement IP Office

 

[jamie77]

It just can't go past R3.2 and the DT ports on the front are no use past R2.1/R3.0DT

Jamie Green

[bold]A[/bold]vaya [bold]R[/bold]egistered [bold]S[/bold]pecialist [bold]E[/bold]ngineer