avaya 5.2.1 s88xx

[AvayaTier3]

Clearing ds1 alarms:
remove programming
remove board
loop it back so it has a signal and does not fail
disable the maintenance object for the board


Causes ds1 alarms:
adding new ds1 board without programming
adding programming without a board
board with programming and a ds1 circuit with no signal

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[jmtelco]

Thank you ,but the issue is with our TN2312BP IPSI boards. We could only upgrade the firmware on all remote sites but not at the main site

 

[AvayaTier3]

It would be nice to be able to edit these. Sorry. I was answering a different thread.

Did you try reseating your ipsi board at the main?

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[jmtelco]

No problem I thought maybe I typed something wrong on the thread, and yes we completely took it the 2 out and put it back we have an escalation with Avaya to Tier 4 and havent received a call back ,If any ideas we would appreciate it

 

[AvayaTier3]

can you ssh to the boards and login?

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com