Avaya 4620 IP Telephone Switchport !!!

[Avayavic]

Hello,

we are using different VLAN´s for different Networks on Avaya P333T / P333PWR Switches.

We want to activate the switch port with a different VLAN than the telephony network, so we dont need to install a new cable.

Example: We use VLAN 400 for telephone Network, on the IP Phone Switchport we want to use VLAN 404.

What do i have to konfigure to use it this way?

Thanks.

 

[JayNEC]

It depends on your LAN switch. It's the access mode vlan (eg untagged) that gets passed to the PC, the phone would be on a different tagged VLAN.
Most PC's cannot understand VLAN tagged packets.

 

[Avayavic]

At the moment the port is as non tagged configured.
I have testet it with a vlan tagged port.
I´ve set the correct vlan at boot up on the IP phone.
The ip phone works on the correct vlan, but the second port on the 4620 is in the same vlan as the phone is configured.

I´ve only the settings for Phone VLAN & Test VLAN.

 

[AramHowe]

Pls refer below doc, which will detail instruct you how to fulfil that function.

<CM2.1-IPTelephonyImplementationGuide.pdf>