Avaya 3645 Wireless IP Phone Showing "NO NET FOUND - NO WMM APs" Merkai infrastructure 1

[Grapestew]

Has anyone delt with the Avaya 3645 Wireless IP phone on a Meraki infrastructure?

I have followed the steps in the 3645 installation manual and also found steps for enabling WMM on the Meraki APs.

I keep getting the same error "NO NET FOUND - NO WMM APs" I'm starting to think this is not possible.

Any advice would be helpful!

 

[CalgaryJeff]

Make sure you update the firmware on these. I haven't used them in a while but they did not connect until a firmware upgrade was done. This was not on Meraki but it was the same issue.

http://www.atcomsystems.ca

ACSS,AIPS

 

[Grapestew]

Jeff, thank you for the reply.

I have downloaded the Firmware upgrade but it seems you need connected to perform the firmware update, am I missing something?