RedQctober101
IS-IT--Management
Avaya 2410 Telephone Sets Not Displaying Ext # in a= field when TTI in. I have have several 2410 sets not display in the A= field (ext display) on the display after TTI in he new number. I have checked with different sets and switched around but, to no avail. Have moved off the line card to see if that was the problem but, still no display. Set will work and display on other locations with no issue. Have busy port and released port as well, and nothing. It only happens randomly through out every 20-30 sets. I had installed two hundred recently in a building. It is on a PBX Definity G3R with all new cards in the local building EPN. Changed some on Friday and a couple were having that problem again (no display of ext #), came in today Monday and all but, two had corrected themselves and are now showing the displayed ext # in A= field. The others did not, but the ext # is there. You can call it and it will work fine but will not display. Bring it to another location/cube and it (the set) works fine. Not the set at all...Any help would be appreciated very much...........
Red
Red