Avaya 2410 justs beeps when i press speaker button

[tektipsblitz]

I have an Avaya 2410 digital phone. When I press the speaker button it does not come up with a dial tone - it just makes a beep noise. Speaker AGC Enabled is set to yes. Anyone have any ideas?
Thanks

 

[tlpeter]

Speaker phone disabled for the extension?
This id an option in the ipo from a certain software level.


BAZINGA!

I'm not insane, my mother had me tested!

www.lantel.nl

 

[tektipsblitz]

I don't see an option in IPO to disable the speaker phone.

Previously the line had an Avaya 4412D+ digital telephone ... and the speaker worked fine.

I'm using IPO version 5.2 (54).

Anybody have any ideas of what I'm missing?

 

[azrael2000]

Hi.

Have you verified that the handsfree option is enabled?

Regards

 

[tektipsblitz]

On the phone Headset AGC, Handset AGC and Speaker enabled is all set to Yes. I've just looked through all the panels in IPO and can't see an area to enable/disable headset or speaker.

 

[amriddle01]

It's in the "extension" section, don't rule out a faulty handset though, if another handset works in that port it's a setting on that handset or it's just plain knackered

http://www.ipoffice.tel

 

[tektipsblitz]

<img src="

http://oi43.tinypic.com/xbd6s0.jpg">

I still don't see it - different software perhaps?

 

[amriddle01]

Ah, I see you are Pre 4.1, that's when the option appeared (5.2 is in fact 3.2....don't ask)

http://www.ipoffice.tel