Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya 2410 justs beeps when i press speaker button

Status
Not open for further replies.

tektipsblitz

IS-IT--Management
Nov 3, 2011
18
CA
I have an Avaya 2410 digital phone. When I press the speaker button it does not come up with a dial tone - it just makes a beep noise. Speaker AGC Enabled is set to yes. Anyone have any ideas?
Thanks
 
Speaker phone disabled for the extension?
This id an option in the ipo from a certain software level.


BAZINGA!

I'm not insane, my mother had me tested!

www.lantel.nl
logolantel.png
 
I don't see an option in IPO to disable the speaker phone.

Previously the line had an Avaya 4412D+ digital telephone ... and the speaker worked fine.

I'm using IPO version 5.2 (54).

Anybody have any ideas of what I'm missing?
 
Hi.

Have you verified that the handsfree option is enabled?

Regards
 
On the phone Headset AGC, Handset AGC and Speaker enabled is all set to Yes. I've just looked through all the panels in IPO and can't see an area to enable/disable headset or speaker. :(
 
It's in the "extension" section, don't rule out a faulty handset though, if another handset works in that port it's a setting on that handset or it's just plain knackered :)

Untitled-1.png
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top