Available on a 51c ansd 11c

[altolabado]

What is the total poosible Tn's available on an OPtion 51C and also the total avail. on an Option 11C

Thanks.

 

[johnpoole]

you only limited to the number of actual tn plus phantom tn's.. in the newer rls you'll have license as opposed to soft tn's

john poole
bellsouth business
columbia,sc

 

[altolabado]

not understanding .... I knwo some 51 have 4 stand alone units... what is actual limit of tn's at most recent software release running ? For both 11c and 51c

 

[johnpoole]

are you looking for the ld 22 slt command? you can add a complete group to a 61 and 5 cab's to an opt 11. the hardware you have installed does not determine the number of soft tn's you have. the placement of your hardware in the switch have a lot to do with that. if you install a t1 at loops 0 4 8 12 and 15, you can add exactly 0 phones to that shelf, no room for ipe's.. you can add columns to a 61 until you run out of slots to add network cards, just because a slot is empty, does not mean you can add a card to that slot

john poole
bellsouth business
columbia,sc

 

[hawks]

11C should be 700 and a 51C was 1000

 

[johnpoole]

and if your cards are not placed right you can't use them all. and on a phantom loop, you can use another 300

john poole
bellsouth business
columbia,sc