Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Auxiliary Ringing Port

Status
Not open for further replies.

Tigerrco

Programmer
Jun 4, 2003
59
0
0
US
We recently installed a Valcom control unit to ring several paging speakers on several incoming lines. It is working on the Compact ICS using Aux. ring port & ringing option.

Can the contact closure duration be lengthened to allow for longer ringing time on the speakers? Right now it's just a short burst.

Thanks.

 
What kind of Valcom Control unit?

Do we have a part #?

How is your system programmed for this to ring the lines?

Steve
tele-dataservices.com
 
The contact closure lenghth can't be adjusted but most over page devices can be set for "contact duration" or " trigger".

example: the Bogan TG4C has momentary or long duration strap.
 
The Valcom control unit is V - 2001A.
Is there an adjustment on Valcom unit?

Norstar Lines are programmed for Auxiliary Ringing to be on.
 
Perhaps you should change the setup...or for future reference you can use the Valcom V-9936A. You can connect straight dial-tone to it, or use an ATA. Then the ringing follows standard cadence.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top