Working on an NS700 but I am not on site and I don't have a dial tone to test myself. When a caller is parked automatically, will it automatically go to park position 00 everytime (if 00 is available, 01 next...)or will it pick random park zones? The customer will have line appearances on the reception phone but wants to park callers for the smaller phone sets. I was going to put park appearances 00 - 03 on the smaall phones so if it always goes to 00 first,01 second..., it will work for them. Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Automatic call park on an NS700
- Thread starter Merbac
- Start date
obtsystems
Programmer
you can set fixed park keys so they will always be those keys. problem I find with automatic park is they have to watch where it goes when they press the key
- Thread starter
- #3
obtsystems
Programmer
if using loop keys on smaller phones, I would normally do the same on reception just to stop confusion. just a few extra loops on reception so they can handle more calls at once
- Status