Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
AUTOCAD ERROR
- Thread starter 2MOORE
- Start date
I'm not sure, because your computer screen is not directly in front of me, but so many times the error is in syntax:
Autocad does not always like single backslashes. your plotter should read something like:
\\ntserver\HP Designjet 2000CP
If that doesn't help, perhaps we could work together to figure it out. I would need a copy of the printer installation disk to create a phantom printer on my machine. Then we could compare error messages until we solved it. If you need to go this route send an email to bfranzus@syclone.net
Autocad does not always like single backslashes. your plotter should read something like:
\\ntserver\HP Designjet 2000CP
If that doesn't help, perhaps we could work together to figure it out. I would need a copy of the printer installation disk to create a phantom printer on my machine. Then we could compare error messages until we solved it. If you need to go this route send an email to bfranzus@syclone.net
- Status