Auto-Registration

[jmarsh56]

I am using CCM 4.2.3. I have the server set for auto-registration. I am giving out 10 phone numbers. I plugged in all 10 IP phones and I get a phone number. If I bring in an 11th IP phone, delete the other 10 phones that are already there, the 11th phone does not get a phone number. i found an article from Cisco which said to check "disable auto registration" then update, then uncheck " disable auto registration" put back in the same phone numbers and it will work. well it doesnt work. If I delete the phones from the call manager I can never use those same 10 numbers again. it appears the database is not releasing those 10 numbers. does anybody know what i can do to release the 10 phone numbers?

thanks.

 

[whykap]

Route plan -> route Plan report -> Find unassigned DN.

Delete all.

You can assign a bigger range of auto reg so you don't have to do this all the time.

 

[jeter]

I agree with WhyKap that you should add a larger range. With a limited amount of ip phones this should be no problem to maintain.

“Reserve your right to think, for even to think wrongly is better than not to think at all”

Tek-TIP Member 19,650

 

[jmarsh56]

thanks, it worked - we do have more numbers that we are using i just shortened it for this example. we just noticed that when we used up all the phone numbers testing this happened so i wanted to know how to fix it. thanks again.