I have set the STSe ver 1.03 to automatically enter night mode at a predetermined time via flash 22. All the times are set using 24hr clock so I know they are entered correctly, but the system will not enter automatically. I have referenced the programming manual and have not found any other parameters to change. Are there any known problems with the current version? Help please!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
auto night mode problems
- Thread starter scitech06
- Start date
skidogrcg15
Programmer
Do you have a voicemail platform on this system? Is the time on it the same as the system?
nfcphoneman
Vendor
Have you verified that Flash 22, Button 1 is set to auto (LED is on)?
Are you trying to change the auto-attendant prompts?
Norstar & Vodavi phone systems and network cabling in Gainesville & Ocala Florida
Are you trying to change the auto-attendant prompts?
Norstar & Vodavi phone systems and network cabling in Gainesville & Ocala Florida
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question