Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Auto incoming call to trunk (countinues loop)

Status
Not open for further replies.

Jhon88

Technical User
Nov 29, 2015
75
ID
Hi all,

I have problem in IP Office 9.1.800.172 with case auto incoming call to trunk.
it happen countinuously loop. see video in this link to details [URL unfurl="true"]https://drive.google.com/open?id=1JbOP6_4icTuoffGlFNqYHJRfKwUN3H1E[/url].

analog_trunk_options_uqqp0c.png

When i try to place that line to analog phone, it's normal. but when that line place in IPO analog trunk port, the problem happen again.

Any suggestion to solve this problem much appreciate.

Thanks,
Jhon
 
Is this a loop start line or ground start? The programming shows ground the video shows loop.
Mike
 
Hi teletecman,

Loop Start, it maybe change to Ground start before restart. so in config view Ground start.
any issue about different type about that ?
 
If the trunk is loop start program it as such. If you program it as ground start it will show off-hook constantly.
Mike
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top