Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Auto Check Boxes from Pull Down Selection

Status
Not open for further replies.

CecilXavier

Technical User
Oct 2, 2007
104
US
I am trying to get a group of check boxes to auto populate when I select an option from a drop down menu. There will be several drop down menu's and each on should affect the check boxes.
Example. 3 check boxes. Check box a b and c. Pull down menu with Choice 1 2 3 4 5 6 etc. If 1 is selected check box a get checked. if 2 is selected the check box a and b are selected. If on drop down has choise 1 selected and another drop down has choice 2 selected then check box a and b will be selected. (Choice 1's a and choice 2's a and b).

Am I being detailed enough? How would I pull this off.
 
Hi CecilXavier

I don't think you can do calculations with check boxes.
But you can fake it by using a text field with a border around it.
Using Zapf Dingbat 3 will give you a ? (check mark).
You can use nearly the same calculations you used with CHALEV.
Except you will have to find the script for if/and statements, which you might be able to google.
Your problem is that you will have to write it so that no 2 statements are true or that will give you a false output.
What is the reason for doing this?

IMacQuarker
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top