Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Auto Attendant

Status
Not open for further replies.

VrRotatetx

IS-IT--Management
Jan 12, 2012
15
US
Everything working except for the dial by name, they can enter the name and then it says press 1 for name and then they press one and nothing, I put transfer and linked it to true but still nothing. What needs to be configured on the transfer action?
 
Yea, knew it had to be something simple. I have it setup to press 1 if you know your parties extension, what command would be placed after 1 for them to enter an extension and be transferred?
 
Depends on the extn range, say for example it wass 201 - 250

Option 1
|
|
Menu Action (add 2?? as custom DTMF entry)
|
|
Transfer Action (again to $KEY)

Done :)

 
we are running callpilot version 5 .. is there a way for the customer to enter in the extension without having to go into the dial by number menu block on an auto attendant?

I call alot of companies " if you know your parties extension enter it at anytime" ..

 
You need the Nortel forum, this is specifically for the IP Office :)

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top