Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Auto Attendant Transfer Recording

Status
Not open for further replies.

Klees

Technical User
Jun 10, 2008
190
US
Hey all,
I am a CM girl working on my first IPO. I need to know IF this can be done. Can I have a recording played after an option is selected? example:
for Mary at extension 200 press 1... I want it to say "for mary press 1" then the call is transferred but before the transfer it says " transferring you to mary extension 200
 
The first response has to be "What type of voicemail server?"

- Embedded Voicemail = No.

- Voicemail Pro = Yes.

Stuck in a never ending cycle of file copying.
 
Awesome thank you We have VM Pro, I will assume the auto attendant uses a license, do you know if the additional recordings for transfers or anything else are going to use up any licenses? they are very limited so I dont want to make any promises. thanks!!!
 
You just need preferred edition and Voicemail channels licensed for the number of call that are in Voicemail simultaneously.

Just add a generic action between the menu action and the transfer action that plays the announcement.

Need some help with IP Office? CLI based cale blocking: SCN fallback over PSTN:
 
or add the extra prompts to the start the Transfer actions settings. Certainly a "Transferring to" prompt followed by $KEY as prompt name will speak "Transferring to 220" or whatever extension number.

Need to work out how to do the name part but likely to be possible.

Stuck in a never ending cycle of file copying.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top