Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Authorization Codes
- Thread starter chs89
- Start date
- Thread starter
- #3
When I finish dialing the number, I get "waived off" tone. The FRL is 3 on the routing pattern that I am using for testing. Is there something in the COR that I have to check in order for the system to know that calls can be completed by inputing an authorization code??
- Thread starter
- #5
G van Hamburg
IS-IT--Management
It's all in the FRL.
If the FRL should be 3 depends on the FRL in the COR of the extension!!
When normally a call is blocked because the FRL doesn't allow it, auth. codes will provide dial tone and after presiing the code the number will go through.
Good luck.
Plan your work............Work your plan
![[afro]](/data/assets/smilies/afro.gif "[afro] [afro]")
If the FRL should be 3 depends on the FRL in the COR of the extension!!
When normally a call is blocked because the FRL doesn't allow it, auth. codes will provide dial tone and after presiing the code the number will go through.
Good luck.
Plan your work............Work your plan
1. Login to definity and enabled authorization codes..
command: change system-parameters features
locate below field and set it yes and put the code lengh you want to have for auth code..
Authorization Codes Enabled? y
Authorization Code Length: 5
2)When you make a call, there two cor which decides the FRL value...ie COR of originating station and the COR you have put in the route pattern. inacse station FRL(COR) is equal or greater than FRL in route patten, your call will go trough without putting anything..Incase station FRL is less than FRL set in route pattern, you will get a second dial tone to put the auth code...
Note: when you create auth codes, you assign a cor also, so FRL of Auth code (COR of Auth code)needs to be equal or greater than the FRL of route pattern.
command: change system-parameters features
locate below field and set it yes and put the code lengh you want to have for auth code..
Authorization Codes Enabled? y
Authorization Code Length: 5
2)When you make a call, there two cor which decides the FRL value...ie COR of originating station and the COR you have put in the route pattern. inacse station FRL(COR) is equal or greater than FRL in route patten, your call will go trough without putting anything..Incase station FRL is less than FRL set in route pattern, you will get a second dial tone to put the auth code...
Note: when you create auth codes, you assign a cor also, so FRL of Auth code (COR of Auth code)needs to be equal or greater than the FRL of route pattern.
- Thread starter
- #8
Thank you all for your responses.
Avaya2004 - I have set all the things that you mentioned above, and I am still getting a waive off tone. I even checked the trunk group to make sure the option for authorization codes was set to YES. I don't know what else to check. Thank you.
Avaya2004 - I have set all the things that you mentioned above, and I am still getting a waive off tone. I even checked the trunk group to make sure the option for authorization codes was set to YES. I don't know what else to check. Thank you.
When I did mine I created a COR with an FRL of 0 on the station and then for the Authorization code we gave that one a COR with a FRL of 3. Most of our routing patterns have a higher FRL than, except for patterns that route callers to our other campuses. There might be more but I am only concerned with ones that allows dialing off campus.
Also, outward calling restrictions on the station's COR should be set to 'none' and also on the COR that the authorization code is using. If not you would get a wave off regardless of auth codes being enabled.
Probably stuff already said, but if not I hope it helps.
Frank
Also, outward calling restrictions on the station's COR should be set to 'none' and also on the COR that the authorization code is using. If not you would get a wave off regardless of auth codes being enabled.
Probably stuff already said, but if not I hope it helps.
Frank
- Thread starter
- #12
I don't have the trace option. But here are the print screens:
TRUNK GROUP
Group Number: 2 Group Type: isdn CDR Reports: y
Group Name: SBS 2nd PRI Copper COR: 1 TN: 1 TAC: 407
Direction: two-way Outgoing Display? y
Dial Access? n Busy Threshold: 99 Night Service:
Queue Length: 0
Service Type: cbc Auth Code? y TestCall ITC: rest
Usage Alloc? n Far End Test Line No:
TestCall BCC: 2 TestCall Service:
TRUNK PARAMETERS
Codeset to Send Display: 6 Codeset to Send TCM,Lookahead: 6
Max Message Size to Send: 260 Charge Advice: none
Supplementary Service Protocol: a Digit Handling (in/out): enbloc/enbloc
Trunk Hunt: cyclical
Connected to Toll? n STT Loss: normal DTT to DCO Loss: normal
Calling Number - Delete: Insert: Numbering Format: pub-unk
Bit Rate: 9600 Synchronization: async Duplex: full
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 0
STATION
Extension: 8281 Lock Messages? n BCC: 0
Type: 8410D Security Code: TN: 1
Port: 01A0315 Coverage Path 1: 203 COR: 3
Name: test sta for codes Coverage Path 2: COS: 0
Hunt-to Station:
STATION OPTIONS
Data Module? n Personalized Ringing Pattern: 8
Speakerphone: 2-way Message Lamp Ext: 8281
Display Language: english Mute Button Enabled? y
CLASS OF RESTRICTION
COR Number: 3
COR Description: Test COR for Authorization Codes
FRL: 2 APLT? y
Can Be Service Observed? n Calling Party Restriction: none
Can Be A Service Observer? n Called Party Restriction: none
Partitioned Group Number: 1 Forced Entry of Account Codes? n
Priority Queuing? n Direct Agent Calling? n
Restriction Override: all Facility Access Trunk Test? n
Restricted Call List? n Can Change Coverage? n
Access to MCT? y Fully Restricted Service? n
Category For MFC ANI: 7 Hear VDN of Origin Annc.? n
Send ANI for MFE? n
MF ANI Prefix: Automatic Charge Display? n
Hear System Music on Hold? y PASTE (Display PBX Data on Phone)? n
Can Be Picked Up By Directed Call Pickup? n
Can Use Directed Call Pickup? n
Pattern Number: 20
Grp. FRL NPA Pfx Hop Toll No. Del Inserted IXC
No. Mrk Lmt List Digits Digits
1: 2 3 949 user
2: user
3: user
4: user
5: user
6: user
BCC VALUE TSC CA-TSC ITC BCIE Service/Feature Numbering LAR
0 1 2 3 4 W Request Format
1: y y y y y n n rest none
2: y y y y y n n rest none
3: y y y y y n n rest none
4: y y y y y n n rest none
5: y y y y y n n rest none
6: y y y y y n n rest none
Please let me know if you find something that I am missing.
TRUNK GROUP
Group Number: 2 Group Type: isdn CDR Reports: y
Group Name: SBS 2nd PRI Copper COR: 1 TN: 1 TAC: 407
Direction: two-way Outgoing Display? y
Dial Access? n Busy Threshold: 99 Night Service:
Queue Length: 0
Service Type: cbc Auth Code? y TestCall ITC: rest
Usage Alloc? n Far End Test Line No:
TestCall BCC: 2 TestCall Service:
TRUNK PARAMETERS
Codeset to Send Display: 6 Codeset to Send TCM,Lookahead: 6
Max Message Size to Send: 260 Charge Advice: none
Supplementary Service Protocol: a Digit Handling (in/out): enbloc/enbloc
Trunk Hunt: cyclical
Connected to Toll? n STT Loss: normal DTT to DCO Loss: normal
Calling Number - Delete: Insert: Numbering Format: pub-unk
Bit Rate: 9600 Synchronization: async Duplex: full
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 0
STATION
Extension: 8281 Lock Messages? n BCC: 0
Type: 8410D Security Code: TN: 1
Port: 01A0315 Coverage Path 1: 203 COR: 3
Name: test sta for codes Coverage Path 2: COS: 0
Hunt-to Station:
STATION OPTIONS
Data Module? n Personalized Ringing Pattern: 8
Speakerphone: 2-way Message Lamp Ext: 8281
Display Language: english Mute Button Enabled? y
CLASS OF RESTRICTION
COR Number: 3
COR Description: Test COR for Authorization Codes
FRL: 2 APLT? y
Can Be Service Observed? n Calling Party Restriction: none
Can Be A Service Observer? n Called Party Restriction: none
Partitioned Group Number: 1 Forced Entry of Account Codes? n
Priority Queuing? n Direct Agent Calling? n
Restriction Override: all Facility Access Trunk Test? n
Restricted Call List? n Can Change Coverage? n
Access to MCT? y Fully Restricted Service? n
Category For MFC ANI: 7 Hear VDN of Origin Annc.? n
Send ANI for MFE? n
MF ANI Prefix: Automatic Charge Display? n
Hear System Music on Hold? y PASTE (Display PBX Data on Phone)? n
Can Be Picked Up By Directed Call Pickup? n
Can Use Directed Call Pickup? n
Pattern Number: 20
Grp. FRL NPA Pfx Hop Toll No. Del Inserted IXC
No. Mrk Lmt List Digits Digits
1: 2 3 949 user
2: user
3: user
4: user
5: user
6: user
BCC VALUE TSC CA-TSC ITC BCIE Service/Feature Numbering LAR
0 1 2 3 4 W Request Format
1: y y y y y n n rest none
2: y y y y y n n rest none
3: y y y y y n n rest none
4: y y y y y n n rest none
5: y y y y y n n rest none
6: y y y y y n n rest none
Please let me know if you find something that I am missing.
- Thread starter
- #14
avaya2004 - what part of the sys fea you want??
LIST AUTHORIZATION CODES REPORT
Authorization Code Class of Restriction(COR)
1234567 6
CLASS OF RESTRICTION
COR Number: 6
COR Description: Only to be used for Dispatch Exts
FRL: 7 APLT? y
Can Be Service Observed? y Calling Party Restriction: none
Can Be A Service Observer? n Called Party Restriction: none
Partitioned Group Number: 1 Forced Entry of Account Codes? n
Priority Queuing? n Direct Agent Calling? n
Restriction Override: all Facility Access Trunk Test? y
Restricted Call List? n Can Change Coverage? n
Access to MCT? y Fully Restricted Service? n
Category For MFC ANI: 7 Hear VDN of Origin Annc.? n
Send ANI for MFE? n
MF ANI Prefix: Automatic Charge Display? n
Hear System Music on Hold? y PASTE (Display PBX Data on Phone)? n
Can Be Picked Up By Directed Call Pickup? n
Can Use Directed Call Pickup? n
LIST AUTHORIZATION CODES REPORT
Authorization Code Class of Restriction(COR)
1234567 6
CLASS OF RESTRICTION
COR Number: 6
COR Description: Only to be used for Dispatch Exts
FRL: 7 APLT? y
Can Be Service Observed? y Calling Party Restriction: none
Can Be A Service Observer? n Called Party Restriction: none
Partitioned Group Number: 1 Forced Entry of Account Codes? n
Priority Queuing? n Direct Agent Calling? n
Restriction Override: all Facility Access Trunk Test? y
Restricted Call List? n Can Change Coverage? n
Access to MCT? y Fully Restricted Service? n
Category For MFC ANI: 7 Hear VDN of Origin Annc.? n
Send ANI for MFE? n
MF ANI Prefix: Automatic Charge Display? n
Hear System Music on Hold? y PASTE (Display PBX Data on Phone)? n
Can Be Picked Up By Directed Call Pickup? n
Can Use Directed Call Pickup? n
- Status
Similar threads
- Locked
- Question
