auth nsrexec

[30121963]

Hello,

i have a problem with 2 W2K Computer.
When I start the Backup from the Networker-Server the
Backup failed (message auth nsrexec)
DNS resolution is O.K. rpcinfo is O.K.

When I start the Backup from the client it is O.K.

Thanks for your help

 

[605]

So the only difference is that the client does not allow the NW server to access this machine.
- Add your NW servers name to ..\nsr\res\servers on the
NW client
- Restart nsrexecd (the Remote Exec Service) on the client
- If it still fails, run
savegrp -v -G group_name
on the NW server. This should give you more info.

 

[30121963]

the entry in the servers file is O.K.
I think the NW-Server has the problem to connect the
client
Manual-Backups from the Client to the NW-Server are running

 

[605]

Well, as i said, run the savegrp command and look at the output. But just use a very small save set.

Another good source is the server's daemon.log file.

 

[1407]

Hi

I had this problem before. If your server is a Compaq, and your NIC is a 6xxx, you'd probably need to check the drivers for that NIC. Go to the latest drivers and that's it.

This is posted in Legato's Web page.