Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AUTH CODE IN MX ONE

Status
Not open for further replies.

aleena7

Technical User
Jan 11, 2012
37
BW
HI All,
I have a question. the system is ericsson mx one. we have given auth code for all employses for out side call so that we can bill it. the access code to get the ISDN PRI TRUNK iS 0. dial *72*auth code#0 ext num. now all can dial simply dial 0. the auth code is not working.
do have to change anything in route or extension parameters. we have both digital and analog extensions.

regards
 
Hi aleena


check the NADAP table - call discrimination data : external/internal. what CAT are given against 0
and then check the extension CAT level EXDDP & KSDDP.

BR
Monro
 
Hi Aleena

Monro is right. Make sure you assign the CAT with no access to "0" to extensions.
Then any user cannot dial "0" as the system will restrict it. They can make calls with the AUTH code but also make sure the CAT assigned for the AUTH code has the "0" access.

BR [thumbsup2]
Nithin
 
Thanks monrovia and nithin
I will try it
regards
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top