Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Audix TN568

Status
Not open for further replies.

racebikeboy

Vendor
Jan 11, 2007
54
GB
I have a new hard drive but its not from avaya.. once i have build it i get the following



system name: audix

login: craft
Password:
Waiting for system to initialize...
Transferring to Firmware

then it reboots ???




 
Was the drive new or used? If used, was a surface scan and low level format run on it prior to loading. If not, then you need to do so, and start over. This is UNIX you are dealing with and it will not mesh with DOS or Windows formats.
 
Its a new Scsi Drive. I am using the generic disk to build the audix back up is that correct?

i Cannot find any detailled documentation to guide me through it!

thanks

 
No matter how in do it it still reboots with the same text


login: craft
Password:
Waiting for system to initialize...
Transferring to Firmware


then reboots

tried 3 new scsi hard drives... pullng my hair out !!!!!
 
email this guy he can probably help, will cost though
neh-telcom
at
comcast
and the thing you catch fish in.
 
Is there an error code displayed when the Audix transfers to firmware control?
 
You need the craft login to add the disk. Good luck on getting that.
 
I believe that the hard drive used in voicemails have areas burnt out of them to stop people using off the shelf hard drives. You will have to source a drive that was previusly in a voicemail.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top