Audix Multi Site over VOIP

[matthartt]

If I have site A and site B in two different states connected via H323 VOIP trunks and the Audix VM is in site A...

How can (or can't they?)site B use coverage paths to the Audix over in Site A?

Right now I have it set up and it rings the hunt group for the Audix, and I have mailboxes set up, but get the generic voicemail greeting.

 

[gblucas]

This can be done...I did it with 7 systems. You have to setup a hunt group on the remote system as a remote audix (I think it is the second page). You have to add features to the signal group for the trunks on each end (it is on the second page of the signal group) and then there is one other thing and I can't remember for the life of me what it is. See if you can do a search on remote audix and see what that brings up. I am sure there is someone that has instructions to do it. My instructions are at home somewhere in a pile of papers since I just moved my home office last week.

gblucas

 

[matthartt]

That is a good start. I will see if I can find anything on that. But if someone else has insight please keep them coming.