Audiocodes ATA Faxing with Mitel 3300

[warlockcode]

Hi

With reference to the post :thread1329-1697721 , has anyone in this forum has integrate MPX Audiocodes with the Mitel 3300 using T38 or G711 pass through via SIP Trunk.

I would appreciate if you can give me a run through of your programming please.
I have all the relevant licenses for Fax and compression and have set up SIP Extensions for the FAX as endpoints on the ATA.

QUESTION:

1)should I add in the ATA as a SIP peer into the controller even though the endpoints are already SIP extensions.

2)will ARS needs to be setup for the new SIP peer above

3)for virtual MiVoice,can this support Fax via the Audiocode

4) what is the basic programming on both the Audiocode and 3300

I have managed to register the endpoints with the 3300 and call internal and external.Also managed to dial in from externally to the endpoints.However, all faxing fails with "Communication Error".

I am running on the latest Mitel 3300 software, clustered environment with SIP Trunks.

Any help is much appreciated.

Thanks.


The freedom to make your own mistakes is all you ever need to succeed.

 

[warlockcode]

Finally got it to work - thanks.
Let me know if anyone needs any assistance.

The freedom to make your own mistakes is all you ever need to succeed.

 

[sipintexas]

I've run into similar problem. Followed the guide and even had the devices registered. Now no luck in registration. I know it's a weekend but if you are on, maybe you could assist. I am running vMCD and Audiocodes mp118 to hook up 7 fax machines.