Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Audio issues after upgrade 1

Status
Not open for further replies.

teletechman

Technical User
Aug 27, 2008
1,685
US
Had a IPO that was at R10.0.0.3 upgraded them to R11.4.13 which is a patch release because of upgrade issues. The 9608 phones went from firmware 6.6.401 to 6.8.02. This introduced Audio problems on thier headsets, echo, static and low volume. I then downloaded the latest firmware 6.8.3 and it fixed it a little but they still have issues with the headsets. The headsets are Plantronics CO52 and they talked to them for the correct settings on the headsets.
My thought is to downgrade the 9608 phones back to the 6.6.401 firmware and see if that will fix it but I wanted to see if anyone has any other thoughts before doing that.
Mike
 
Hi there, I had the same issue where the last few releases upgraded to 6.8002, I logged a case with Avaya and they supplied me software version 6.8102 and this sorted out the issue immediately after the handsets upgraded.

Funny thing is after they gave me this 11.0.4.1.0 Build 11 came out and it had the same 6.8002 on it, so I still have to manually copy the software over.

So ask them for that version it does work.

Cheers
 
That release is still one the website so I will download it and test.
Mike
 
or just change the firmware files to an older version in the primary folder and amend the upgrade.txt file to suit.

*********************************************
* Application and Kernel file for 9608
*********************************************
# 9608SW
IF $HWVERS SEQ 3 GOTO 9608GBSW
SET RFSNAME S96x1_UKR_V27r20_V27r20.tar
SET APPNAME S9608_11HALBR6_6_4_01_V474.tar
GOTO GETSET

# 9608GBSW
SET APPNAME S9608_11_HALKRR6_6_4_01.bin
GOTO GETSET

replace the 9608 firmware with
S96x1_UKR_V27r20_V27r20.tar
S9608_11_HALKRR6_6_4_01.bin
S9608_11HALBR6_6_4_01_V474.tar



takes two mins and you won't have to drop the system

ACSS SME
APSS SME

A word to the wise ain't necessary - it's the stupid ones that need the advice.
 
there is a patch out for the headset ports on the 9600 phones for that release.

It will put your phones on (I think) 6.8.20 and fixes it.

you have to get the fix from Avaya I am afraid.
reference the following number PSN020399u



Here is the link to the firmware on my google drive

I leave it up for a couple of weeks then take it down before Avaya kicks me at the shin for publishing their fixes.

Joe W.

FHandw, ACSS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter
 
Anyone experienced the same audio issues on the J series phones on this release and/or know if there is a patched firmware for them?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top