Audio IP Reflector Page

[Planetmaker]

We have begun looking at IP Communicator access over Citrix.

I have found a link explaining this

http://support.citrix.com/article/CTX109577

And quote the an extract:

How to set up the audio IP reflector page:

1. Run the Cisco IP Communicator Administration Tool and select the option to enable the HTTP access. Doing this creates a getIP.asp reflector Web page.

2. Specify the location of the getIP.asp Web page in the Cisco CallManager Administration (Device > Phones > Phone Configuration > Product Specific Configuration > IP Address Auto-detection URL).
Note: By default, getIP.asp is stored

Where is the Cisco IP Communicator Administration Tool?
There's nothing on the Communicator Device page and cannot find anything in the Call Manager Admin pages.

Point 2 should just be the IP of our CM.

We are running 4.2.

Thanks

 

[DEADbyWEDNESDAY]

The admin tool is inside the zip you can download from the CCO if you are a registered guest with contract associated.

2.1.1 is avaialble for vista.

we use 2.1 behind Checkpoint. we have audio issues that i am working out. believe its with the RTP protcol

i and i never found this in the admin pages either
(Device > Phones > Phone Configuration > Product Specific Configuration >

there is no phones configuration option .

i am 4.1.3 sr3c

 

[Planetmaker]

Thanks. I have a login but can you post the link? I can't find it!

 

[DEADbyWEDNESDAY]

http://www.cisco.com/en/US/products/sw/voicesw/ps5475/index.html

click download software on the right

 

[Planetmaker]

Right thanks - I'll stick it on the cm once the chnage request gets approved! Do you know where there are any screen caps on it??

 

[DEADbyWEDNESDAY]

no i do not.

 

[Planetmaker]

ok