AUD029-Continously

[lliesbthighs]

Hi it is 61c Release 25.40,I am getting AUD029 continously on screen, it actually happened when we changed the time of PBX one hour decrement due to state policy for winter in APAC. When i convert CONV 0c04 it point 12-0-1-0 which is unequipped, i also disabled that card but problem still exist, I can do normal work on terminal due to these errors.
Could somebody help in this?
Regards,

Capture
--------

AUD029 00EA3FF0 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00EAF7D8 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00EC559C 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00EC8C9C 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00EEEDE8 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00EF7768 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00EFE48C 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00F0BDF8 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00F17428 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00F1C0A4 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00F2864C 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00F32F98 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00F39348 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00F3FEB4 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000
AUD029 00E3DAD4 00000C04 00000001 00000C98 00000000 00000000 00000008 00000C98 0
0000000

 

[GHTROUT]

>kd 32
NPR000
.conv 0C98
=> 012 0 06 08


Try a disable and re-enable 012 0 06 08



~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[lliesbthighs]

CONV 0c04
CONV 0c98
Gave 2 TN which are unequipped, tried disabling both card but no solution however when i create 2 dummy extensions on these 2 TNs the AUD error gets stop (note that both TN are faulty), for a workaround i created dummy extension on both TN`s.
Any more advice?

 

[GHTROUT]

Outsatanding work... I bet you can out those TNs now and the errors will still be gone





~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]