Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AUD 422

Status
Not open for further replies.

trbuman

Technical User
Dec 2, 2003
20
US
I am receiving an AUD422 message on an option 61C. Any help would be greatly appreciated. Thanks in advance.
Here is the message I am getting

AUD422 006A6C4C 00000407 00000003 00001A84 00000001 00001427 00000000 3279 NULL
 
AUD0422 a b c d e f g h i A call with MAINPM = .REORDER was found not to be receiving nor
waiting for overflow tone. Overflow tone will be given. Where:
a = CR Addr MAINPM/AUXPM
b = Originating Type
c = Originating TN
d = Terminating Type
e = Terminating TN
f = QUEUE IN
g = CR Dialed DN
h = Digit Words (0)
i = Queue Type
 
004 0 01 03,024 1 01 08,020 0 09 03..those are the three tn's mentioned in the alarm, i would look at those three to see if one of them was causing the problem.. might have been a conf or transfer that was not comp. could be a bad station giving bad commands from water damage etc.. the nortel codes are so CLEAR...




john poole
bellsouth business
columbia,sc
 
Two of the TN's do not exist and the last one is the TN of the phone having trouble. Thanks again
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top