Hi, not a phone expert so need a little help. We have a Lucent 302c attendant console and a couple buttons are pretty worn. Saw a 302A/302B that look pretty much the same. Is there any major difference and would we be able to just swap them without any system changes? Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Attendant Console.
- Thread starter jjjax64
- Start date
AvayaTier3
Technical User
Check the circuit pack and wiring to see if you are using 2w or 4w circuit. If you have a 4w pack and wiring, you can use 302A/302B
In June 2001, the 302D Attendant Console replaced all sales of
the 302C Attendant Console (along with all prior models - 302A, 302B).
It is important to note that the 302D is 2-wire only and is backward compatible
to all 2-wire DEFINITY installations.
The 302As, 302Bs are 4-wire compatible only; where as the 302Cs are both 2-wire
and 4-wire compatible.
Product Migration Path:
The 302D Attendant Console is a viable replacement; however, the 302D is 2-wire
only compatible and the customer must address this in the event that 302As or
302Bs (both 4-wire) are being replaced (certain circuit cards will need to be
replaced with cards that support 2-wire at the customer's expense)
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting
In June 2001, the 302D Attendant Console replaced all sales of
the 302C Attendant Console (along with all prior models - 302A, 302B).
It is important to note that the 302D is 2-wire only and is backward compatible
to all 2-wire DEFINITY installations.
The 302As, 302Bs are 4-wire compatible only; where as the 302Cs are both 2-wire
and 4-wire compatible.
Product Migration Path:
The 302D Attendant Console is a viable replacement; however, the 302D is 2-wire
only compatible and the customer must address this in the event that 302As or
302Bs (both 4-wire) are being replaced (certain circuit cards will need to be
replaced with cards that support 2-wire at the customer's expense)
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question