Attcon questions

[RyanEOD]

All,

I am trying to wire up an Attcon here in the office for some testing. We USED to have one wired so I don't think it will be too hard. I have it wired through and the m2250 is powering up and display lights up. Now I try dialing 0 but it doesn't ring there. I am trying to figure out how to get a call on it.

I went to LD21 and did a PRT on my ATT_DATA;

TYPE ATT_DATA
CUST 00
OPT AHA BIND BIXA BLA
    DNX IC2 ITG IDP XLF IBL
    MWUD LOD
    REA SYD ATDA
ATDN 0
NCOS 4
CWUP YES
CWCL 0 0
CWTM 0 0
CWBZ NO NO
MATT NO
RTIM 15 60 14
ATIM 0
AQTT 30
AODN 7000
SPVC 00
  SBLF NO
RTSA RSAD
SACP SNGL
ABDN NO
IRFR NO
XRFR NO
IDBZ NO
PBUZ 02  10
ICI 00 IADN
ICI 01
ICI 02 CFN
ICI 03 IAT
ICI 04 RLL
ICI 05 INT
ICI 06 LD0 LD4
ICI 07 LD3
ICI 08 LD5
ICI 09
ICI 10
ICI 11
ICI 12
ICI 13
ICI 14
ICI 15
ICI 16
ICI 17
ICI 18
ICI 19 DL0
RICI

Then in load 20 I do a prt on 2250;

N   000 0 09 06  VIRTUAL
TYPE 2250
CDEN 8D
CTYP XDLC
CUST 0
ERL 0
SGRP 0
SETN 000 0 09 07
ANUM 03
IADN
SSU
ICDR ICDD
ABAN ABDD
CPND CNDD
EBLF BLFD
AADN
DNDI DNDD
DAPC DAPA
LANG 00
KEY  00
KEY  01
KEY  02
KEY  03
KEY  04
KEY  05
KEY  06
KEY  07
KEY  08
KEY  09 EES
KEY  10
KEY  11
KEY  12
KEY  13
KEY  14
KEY  15
KEY  16
KEY  17
KEY  18
KEY  19
DATE 14 OCT 2009

I am wired up to 0 0 9 6 and 0 0 9 7.

So, I am thinking 0 should work to the console and then go to 7000 if it is in night service? When I call 0 I ring 4 times, and then route to 7000. I do NOT see the console ringing at all. Thoughts?

 

[RyanEOD]

All - I figured it out, it had power but the pairs were swapped. I swapped White/Brown with White/Green and it came up as expected and I was able to take it out of night service and dial it.

 

[SL1M1]

LD 12 and give your 2250 an IADN, that would be another idea

Cheers!!