I did an AT-X to a SOE DT unit due to unknown password. This caused the unit to go into a loop yesterday and was unusable. Today I tried again, all I get is:-
Programming FPGA ...
FPGA Version 89
Ethernet Switch: PortId=0520, PhyId1/2=01410C1F
P6 Loader 1.1
CPU Revision 0x0502
on the terminal and the power light is red. Nothing from the lan.
Thanks
Programming FPGA ...
FPGA Version 89
Ethernet Switch: PortId=0520, PhyId1/2=01410C1F
P6 Loader 1.1
CPU Revision 0x0502
on the terminal and the power light is red. Nothing from the lan.
Thanks