I went to install XP Pro using the upgrade feature from W2K. It copied the startup files then restarted to continue setup. Now all that happens is that the machine boots directly into BIOS with a message that says: The system intruded, chassis opened or tempered before. Please check the system.
I cannot get out of this. Restarting does not work, I have reloaded setup defaults and cleared the CMOS. I have checked the chassis alarm jumper and it is disabled. H/w monitor is extremly slow. Voltage readouts are twice what they should be. They are the wrong readings, I got the syustem to start once, if the readings were true, the machine would be a smoking crater about now. I thought maybe a PSU fault, but it seems like too much of a coincidence. I cannot boot from any device. Help needed desperatly.
Thanks in advance,
IceMage
I cannot get out of this. Restarting does not work, I have reloaded setup defaults and cleared the CMOS. I have checked the chassis alarm jumper and it is disabled. H/w monitor is extremly slow. Voltage readouts are twice what they should be. They are the wrong readings, I got the syustem to start once, if the readings were true, the machine would be a smoking crater about now. I thought maybe a PSU fault, but it seems like too much of a coincidence. I cannot boot from any device. Help needed desperatly.
Thanks in advance,
IceMage