henrymalega
Technical User
I just recently got an ASUS A7A266 motherboard with an Athlon 950 cpu attatched. I flashed the bios chip and started it with the minimum peripherals, ie: floppy, cd, formatted 1.2 gig hard drive and 1 stick of 64 meg sdr. I know about the heat issues that the 960 create so I installed a cpu fan on a short heat sink connected to the hard drive power plug. also I have a fan from an old power supply wired externally for 24 volts mounted about 3 inches from it and a fan mounted on the housing to exhaust the heat. My first boot was in the jumperless config. I got an error message saying that there was a conflict in the speed settings. ie: cpu/clock. The board is a 133/33. I would appreciate any input that anyone might have as to what I am doing wrong. I await your replys with baited anticipation.