pojchaysiri
Technical User
ASU II not detect on MX rel 9.XX
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ASU II can't detect on 3300 mx rel.9.xx 1
- Thread starter pojchaysiri
- Start date
- Status
Devolution
Programmer
Are you using a crossover CAT5 patch lead to connect the ASU to the MX?
- Thread starter
- #5
pojchaysiri
Technical User
Billz66 : yes, new ASU II
YZeglam : MX Rel 9.0.3.28
Devolution : Yes,
YZeglam : MX Rel 9.0.3.28
Devolution : Yes,
@ YZeglam - This is not an MX-One. This is a 3300 with an MX hardware chassis. 3300's have a large variety of configurations 700, 250, MX, LX AX, MXe, etc...
**********************************************
What's most important is that you realise ... There is no spoon.
**********************************************
What's most important is that you realise ... There is no spoon.
12-5191-00272 Article Type
Technical Bulletin
Article Title
New ASU II out of box may fail to sync up with 3300 Publish Date
May-30-2012
This is a known issue
Body/Solutions
Symptoms= The new ASU II out of box may fail to sync up and does not show up as installed prior to MCD 5.0 SP2.
Root Cause Analysis:
The issue is determined to be the SDRAM timing issue and may potentially happen in the ASU II with hardware rev. of A.8.
Solution: Download ASUII_FW_1.0.0.31.zip, unzip the file and follow the ASUII_FW_1.0.0.31_Readme.doc to apply the ASU_MAIN.img
Long term Solution
The official solution will be available in MCD 5.0 SP2 which is tentatively scheduled to release on Jun 6, 2012.
If I never did anything I'd never done before , I'd never do anything.....
Technical Bulletin
Article Title
New ASU II out of box may fail to sync up with 3300 Publish Date
May-30-2012
This is a known issue
Body/Solutions
Symptoms= The new ASU II out of box may fail to sync up and does not show up as installed prior to MCD 5.0 SP2.
Root Cause Analysis:
The issue is determined to be the SDRAM timing issue and may potentially happen in the ASU II with hardware rev. of A.8.
Solution: Download ASUII_FW_1.0.0.31.zip, unzip the file and follow the ASUII_FW_1.0.0.31_Readme.doc to apply the ASU_MAIN.img
Long term Solution
The official solution will be available in MCD 5.0 SP2 which is tentatively scheduled to release on Jun 6, 2012.
If I never did anything I'd never done before , I'd never do anything.....
-
1
- #8
- Status
