Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Assigned Modem IRQ changes with bootup

Status
Not open for further replies.

Ruspc

Technical User
Jun 15, 2002
10
0
0
US
After getting knocked off AOL I started having trouble
with my Rockwell modem. Basically, I got it working
again by removing it with the Device Manager and shutting down the computer. When I reboot, PandP, sees the modem and reinstalls it. It assigns it IRQ 9. I am able to get on AOL fine. When I reboot the computer the next day I get an AOL message "cannot initialize your modem." Turns out it shows the IRQ as 5 which is being used by a game device. The only way I get it back to IRQ 9 is to reinstall the modem.

What makes the IRQ change from 9 to 5?

Any suggestions?

Thanks,

Rus
 
Hardware. In BIOS, it's assigned IRQ5, because 9 is a shared system IRQ.
If you want a permanent fix (assuming you do), try this:
Boot to safe mode, remove all com ports, and modems in device mangler.
Restart, go into BIOS setup.
Disable com 2.
Set "Reset configuration data" to YES.
Set "PnP OS installed" to NO.
Restart, let things install, reinstall modem.
Should all work fine now.

Cheers,
Jim
iamcan.gif
 
Hi Jim,

Thanks for your reply. Sounds like that will do the trick.

I checked the help files in Win98 and discovered I could change the IRQ for the modem to 9, and it would remain if I unchecked a box labelled, "use automatic settings." At the moment things are OK. If something else occurs I will delve into the Bios.

Regards,

Rus
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top