assign 3300 ICP licenes to and MCD software pakage

[Alaa1982]

Dear All;
I'm try to assign the Mitel 3300 ICP: 1 Desktop/Wireless License
to a MCD software package but it didn't accepted. any suggestions how i can assign it.

Regards
Ala'a

 

[Supernova99]

Go to the licensing and options form
enter the application record (if blank)
click on retrieve
click save

If you get errors then check your DNS settings and your firewall policy
AMC licensing requires TCP port 22 (SSH) access to sync.mitel-amc.com or IP address 216.191.234.91

Share what you know - Learn what you don't

 

[wireman50]

Have you got the correct licence for your software level....older licences won't work on latest software and vice versa?

 

[LoopyLou]

What load of software? What part number? As wireman50 says older licenses have been discontinued and may not be recognized by newer systems so if the license is old and been in your bank a while it might not go on a new system.

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.

 

[wireman50]

Newer licences won't work on older systems either. I suspect a pre 4.1 system trying to use a post 4.1 licence; I tried this (cos the later ones are now £50 cheaper than early ones) and they won't be accepted.