ASN Routers 1

[kcckwt]

Hi,
I am very new to Bay ASN Routers, I am looking for some configuration documents and utilities like Site Manager.
we have one ASN-AF0002x13 Router stacked with 3 ASN- AF0002A01 Routers with SPEX Module. 15 remote sites getting connect throught AN routers and Motorola Modem V3600.
Main ASN Router :

IMAGE : REL/13.10/
CREATED : Mon Nov 23 21:22:41 EST 199
Will be greatful if anyone can help me.

Regards

 

[whiskeytrain]

I would try

http://www.nortelnetworks.com

Go to software downloads and then BayRS routers and/or software. I'm not sure what is available without a contract. I suspect that documentation will be available, but Fright(Site)Manager and updated code may not.
Also note that the AN/ANH is end-of-life.

Hope this helps

 

[kcckwt]

Hi,
i did check in Nortel Site,no documents are available. we are not authorized sellers, we r basically in to HP and Sun solutions.This project includes Sun Servers and Bay Routers.unfortunately i am responsible for handling both. any other source, where in i could buy configuring and adiminstering ASN Routers.
Thanks

 

[Brat]

Hi, kcckwt

You need service contract to download latest SiteManager and BayRS software from Nortel web site.

Software documenation is for free. You CAN access it without service contract.
Go to:

http://www130.nortelnetworks.com/cgi-bin/eserv/cs/main.jsp?cscat=documentation

and select "BayRS Router Software" link NOT "BayRS Routers", there you can find doc files you need.

BRAT

 

[kcckwt]

Hi,
I need to assign a secondary Ip Address for an ethernet Interface on ASN Router. i don't have site manager.. Please reply back ASAP !!
Regards

 

[advisor1]

I have site manager SW - contact advisor@inbox.ru

 

[dtabera]

Hi:

Does anybody knows if the ASN serial console cable (9 pin to 25 pin connectors) has a special pinout? I have been reading cable guide but I do not see it clearly.

Regards,

Diego.

 

[Brat2]

Hi dtabera

Easiest is to use straight DB9F to DB9F cable. You have to use one-to-one connections. Null-Modem cables doesn't work.

Brat

 

[dtabera]

Thanks Brat2:

when you say straight cable and one-to-one connections, you mean pin 1 to ping 1, pin 2 to pin 2, and so on ¿right?:

D.

 

[Brat2]

Hi, dtabera

Exactly one-to-one. Maybe it was not clear in englis - it was strict translation from my native language.

Brat

 

[dtabera]

Thanks mate, I will try it.

D.

 

[4x4Jim]

I have a Nortel ARN with only a 8mb flash card. The only thing i can use is the TI commands "which I do not know". What I need to do is change the IP#'s for this box.
Here is a list of some of the things I have found.

[1:1]$ list wfIp*
wfIpBase = 1.3.6.1.4.1.18.3.5.3.2.1.1
wfIpBaseRtEntry = 1.3.6.1.4.1.18.3.5.3.2.1.2.1
wfIpBaseHostEntry = 1.3.6.1.4.1.18.3.5.3.2.1.3.1
wfIpInterfaceEntry = 1.3.6.1.4.1.18.3.5.3.2.1.4.1
wfIpStaticRouteEntry = 1.3.6.1.4.1.18.3.5.3.2.1.5.1
wfIpAdjacentHostEntry = 1.3.6.1.4.1.18.3.5.3.2.1.6.1
wfIpTrafficFilterEntry = 1.3.6.1.4.1.18.3.5.3.2.1.7.1
wfIpForwardEntry = 1.3.6.1.4.1.18.3.5.3.2.1.16.1
wfIpNetToMediaEntry = 1.3.6.1.4.1.18.3.5.3.2.1.18.1
wfIpAccCtrlFilterEntry = 1.3.6.1.4.1.18.3.5.3.2.1.19.1
wfIpAccCtrlNetworkEntry = 1.3.6.1.4.1.18.3.5.3.2.1.20.1
wfIpAccCtrlUserHostEntry = 1.3.6.1.4.1.18.3.5.3.2.1.21.1
wfIpAddrEntry = 1.3.6.1.4.1.18.3.5.3.2.1.22.1
wfIpInternalHostEntry = 1.3.6.1.4.1.18.3.5.3.2.1.23.1
wfIpIntfCfgEntry = 1.3.6.1.4.1.18.3.5.3.2.1.24.1
wfIpIntfStatsEntry = 1.3.6.1.4.1.18.3.5.3.2.1.25.1
wfIpIntfStatsIcmpEntry = 1.3.6.1.4.1.18.3.5.3.2.1.26.1
wfIpRfRipImportEntry = 1.3.6.1.4.1.18.3.5.3.2.1.8.1
wfIpRfRipExportEntry = 1.3.6.1.4.1.18.3.5.3.2.1.9.1
wfIpRfOspfImportEntry = 1.3.6.1.4.1.18.3.5.3.2.1.10.1
wfIpRfOspfExportEntry = 1.3.6.1.4.1.18.3.5.3.2.1.11.1
wfIpRfEgpImportEntry = 1.3.6.1.4.1.18.3.5.3.2.1.12.1
wfIpRfEgpExportEntry = 1.3.6.1.4.1.18.3.5.3.2.1.13.1
wfIpRfBgp3ImportEntry = 1.3.6.1.4.1.18.3.5.3.2.1.14.1
wfIpRfBgp3ExportEntry = 1.3.6.1.4.1.18.3.5.3.2.1.15.1
wfIpxBasicSysEntry = 1.3.6.1.4.1.18.3.5.5.15.1
wfIpxAdvSysEntry = 1.3.6.1.4.1.18.3.5.5.16.1
wfIpxCircEntry = 1.3.6.1.4.1.18.3.5.5.17.1
wfIpxDestEntry = 1.3.6.1.4.1.18.3.5.5.18.1
wfIpxUserStaticRouteEntry = 1.3.6.1.4.1.18.3.5.5.19.1
wfIpxAutoStaticRouteEntry = 1.3.6.1.4.1.18.3.5.5.20.1
wfIpxStaticRouteMaskEntry = 1.3.6.1.4.1.18.3.5.5.21.1
wfIpxServEntry = 1.3.6.1.4.1.18.3.5.5.22.1
wfIpxUserStaticServEntry = 1.3.6.1.4.1.18.3.5.5.23.1
wfIpxAutoStaticServEntry = 1.3.6.1.4.1.18.3.5.5.24.1
wfIpxStaticServMaskEntry = 1.3.6.1.4.1.18.3.5.5.25.1
wfIpxStaticHostEntry = 1.3.6.1.4.1.18.3.5.5.26.1
wfIpxUserStaticNETBIOSEntry = 1.3.6.1.4.1.18.3.5.5.27.1
wfIpxAutoStaticNETBIOSEntry = 1.3.6.1.4.1.18.3.5.5.28.1
wfIpxRouteFilterEntry = 1.3.6.1.4.1.18.3.5.5.29.1
wfIpxServNetFilterEntry = 1.3.6.1.4.1.18.3.5.5.30.1
wfIpxServNameFilterEntry = 1.3.6.1.4.1.18.3.5.5.31.1
wfIpxRipCircEntry = 1.3.6.1.4.1.18.3.5.5.32.1
wfIpxSapCircEntry = 1.3.6.1.4.1.18.3.5.5.33.1
wfIpxHostEntry = 1.3.6.1.4.1.18.3.5.5.34.1
wfIpxForwardEntry = 1.3.6.1.4.1.18.3.5.5.35.1
wfIpxTrafficFilter2Entry = 1.3.6.1.4.1.18.3.5.5.36.1
wfIpRipAcceptEntry = 1.3.6.1.4.1.18.3.5.3.2.6.1.1
wfIpRipAnnounceEntry = 1.3.6.1.4.1.18.3.5.3.2.6.2.1
wfIpOspfAcceptEntry = 1.3.6.1.4.1.18.3.5.3.2.6.3.1
wfIpOspfAnnounceEntry = 1.3.6.1.4.1.18.3.5.3.2.6.4.1
wfIpEgpAcceptEntry = 1.3.6.1.4.1.18.3.5.3.2.6.5.1
wfIpEgpAnnounceEntry = 1.3.6.1.4.1.18.3.5.3.2.6.6.1
wfIpBgp3AcceptEntry = 1.3.6.1.4.1.18.3.5.3.2.6.7.1
wfIpBgp3AnnounceEntry = 1.3.6.1.4.1.18.3.5.3.2.6.8.1
wfIpBgp4AcceptEntry = 1.3.6.1.4.1.18.3.5.3.2.6.9.1
wfIpBgp4AnnounceEntry = 1.3.6.1.4.1.18.3.5.3.2.6.10.1
wfIpIgmpGroupPolicyEntry = 1.3.6.1.4.1.18.3.5.3.2.6.11.1
wfIpMospfAcceptEntry = 1.3.6.1.4.1.18.3.5.3.2.6.13.1
wfIpMospfAnnounceEntry = 1.3.6.1.4.1.18.3.5.3.2.6.14.1
wfIpDvmrpAcceptEntry = 1.3.6.1.4.1.18.3.5.3.2.6.15.1
wfIpDvmrpAnnounceEntry = 1.3.6.1.4.1.18.3.5.3.2.6.16.1
wfIpex = 1.3.6.1.4.1.18.3.5.15.1
wfIpexMappingEntry = 1.3.6.1.4.1.18.3.5.15.2.1
wfIpexSessionEntry = 1.3.6.1.4.1.18.3.5.15.3.1
wfIpxBase = 1.3.6.1.4.1.18.3.5.5.1
wfIpxBaseRtEntry = 1.3.6.1.4.1.18.3.5.5.2.1
wfIpxBaseSapEntry = 1.3.6.1.4.1.18.3.5.5.3.1
wfIpxInterfaceEntry = 1.3.6.1.4.1.18.3.5.5.4.1
wfIpxRipIntfEntry = 1.3.6.1.4.1.18.3.5.5.5.1
wfIpxAdjacentHostEntry = 1.3.6.1.4.1.18.3.5.5.6.1
wfIpxStaticRouteEntry = 1.3.6.1.4.1.18.3.5.5.7.1
wfIpxNetBiosStaticRouteEntry = 1.3.6.1.4.1.18.3.5.5.8.1
wfIpxSapNetLvlFilter = 1.3.6.1.4.1.18.3.5.5.9.1
wfIpxSapServLvlFilter = 1.3.6.1.4.1.18.3.5.5.10.1
wfIpxTrafficFilterEntry = 1.3.6.1.4.1.18.3.5.5.11.1
wfIpxStaticSapEntry = 1.3.6.1.4.1.18.3.5.5.12.1
wfIpxBaseRt2Entry = 1.3.6.1.4.1.18.3.5.5.13.1
wfIpxAggrStats = 1.3.6.1.4.1.18.3.5.5.14
wfIpv6Base = 1.3.6.1.4.1.18.3.5.3.16.1.1.1
wfIpv6IfEntry = 1.3.6.1.4.1.18.3.5.3.16.1.1.2.1
wfIpv6AddrPrefixEntry = 1.3.6.1.4.1.18.3.5.3.16.1.1.3.1
wfIpv6AddrEntry = 1.3.6.1.4.1.18.3.5.3.16.1.1.4.1
wfIpv6IfStatsEntry = 1.3.6.1.4.1.18.3.5.3.16.1.1.5.1
wfIpv6StaticRouteEntry = 1.3.6.1.4.1.18.3.5.3.16.1.1.6.1
wfIpv6AdjacentNodeEntry = 1.3.6.1.4.1.18.3.5.3.16.1.1.7.1
wfIpv6RouteEntry = 1.3.6.1.4.1.18.3.5.3.16.1.1.8.1
wfIpv6NetToMediaEntry = 1.3.6.1.4.1.18.3.5.3.16.1.1.9.1
wfIpv6DbgInfoEntry = 1.3.6.1.4.1.18.3.5.3.16.1.1.10.1
wfIpv6FilterEntry = 1.3.6.1.4.1.18.3.5.3.16.1.1.11.1
wfIpv6IcmpEntry = 1.3.6.1.4.1.18.3.5.3.16.2.1.1
wfIpv6NdiscIfEntry = 1.3.6.1.4.1.18.3.5.3.16.3.1.1
wfIpv6Udp = 1.3.6.1.4.1.18.3.5.3.16.4.1
wfIpv6UdpEntry = 1.3.6.1.4.1.18.3.5.3.16.4.2.1
wfIpv6Log = 1.3.6.1.4.1.18.3.5.3.16.5.1
wfIpAcctBase = 1.3.6.1.4.1.18.3.5.20.1.1
wfIpAcctTableEntry = 1.3.6.1.4.1.18.3.5.20.1.2.1
wfIpAcctCctTableEntry = 1.3.6.1.4.1.18.3.5.20.1.3.1
wfIpCkAcctTableEntry = 1.3.6.1.4.1.18.3.5.20.1.4.1

[1:1]$ list ip*
ip = 1.3.6.1.2.1.4
ipAddrEntry = 1.3.6.1.2.1.4.20.1
ipRouteEntry = 1.3.6.1.2.1.4.21.1
ipNetToMediaEntry = 1.3.6.1.2.1.4.22.1

[1:1]$ get ipAddrEntry.1
ipAddrEntry.ipAdEntAddr.65.119.123.102 = 65.119.123.102

[1:1]$ get ipAddrEntry.2
ipAddrEntry.ipAdEntIfIndex.65.119.123.102 = 1

[1:1]$ get ipAddrEntry.3
ipAddrEntry.ipAdEntNetMask.65.119.123.102 = 255.255.255.252

[1:1]$ get ipAddrEntry.4
ipAddrEntry.ipAdEntBcastAddr.65.119.123.102 = 1

[1:1]$ get ipAddrEntry.5
ipAddrEntry.ipAdEntReasmMaxSize.65.119.123.102 = 0

[1:1]$ show ip circuits
Circuit Circuit # State IP Address Mask
-------- ----------- ------- ---------------- --------------
S11 1 Down 65.119.123.102 255.255.255.252
E11 2 Up 67.131.155.97 255.255.255.224
2 circuit(s) found

[1:1]$ getcfg

Boot Options:
boot image=local
boot config=local

NetBoot Parameters:
XCVR1...IP=10.10.5.1,Mask=255.255.255.0,
NextHop=10.10.5.100
COM1....EZ-Install

I have changed XCVR1 to IP # 10.10.5.1 using 'ifconfig'

Can someont please tell me how to change IP#'s 65.119.123.102 and 67.131.155.97. I think it is the "set command" but I have not yet came across the corrent syntax
I have tried
set ipAddrEntry.ipAdEntAddr.1 10.10.5.10
but this didnt work.

Thanks,
Jim Wilson