ASM and Message Waiting

[ewing453]

I have a 8 port analog station module on a MICS rel 5. I can get the stutter dial tone to work, but I can't get visual MW to work. I am trying this with a M8314 analog phone. Does anyone have a suggestion as to what type of phone the "lamp" MW will work on?

 

[Arr]

Dumb question but..
are you sure that it is an analog module WITH MW? There are two flavors.

PhM

 

[jerryreeve]

the book says that it will light a 2500 set with a message lamp so that is probably 90 volt nominal. it also says that a standard ASM can get stutter dial tone but not the lamp voltage.

I think ARR has it on you that you may not have the M0X8M but rather the M0X8A.

JerryReeve
Communications Systems Int'l
com-sys.com

 

[ewing453]

I had read in another post if you had stutter dialtone it was the module with MW. Maybe it is not. So we really have 3 scenarios:

ATA: No stutter dialtone or light
M0x8A: Stutter Dialtone Only
M0x8M: Stutter Dialtone and Light

 

[Arr]

Ewing,
As JR says the analog mod w/out MW will return stutter.

PhM