Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ASBCE with NexVortex SIP Trunk 1
- Thread starter dsm600rr
- Start date
Not Nexvortex but several others. What's your issue?
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
- Thread starter
- #3
-
1
- #4
I see...
This one covers the ASBCE part:
This one covers IPO: But you have to use the SBC A1 interface as ITSP Proxy and leave the registration empty on IPO.
You can check for other docs how to configure SIP trunk with IPO and SBC. The IPO part is provider specific, the SBC part is nearly always the same.
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
This one covers the ASBCE part:
This one covers IPO: But you have to use the SBC A1 interface as ITSP Proxy and leave the registration empty on IPO.
You can check for other docs how to configure SIP trunk with IPO and SBC. The IPO part is provider specific, the SBC part is nearly always the same.
IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN
- Thread starter
- #5
derfloh: Thank you, I will go through those documents you provided. I should mention I do have the SIP Trunk up and running on my IPO just without the SBC at the moment.
Curious, wouldn't it be the other way around, with the IPO Part being almost always the same as the IPO Registers to the ASBCE and the ASBCE part be provider specific as it registers with the SIP Trunk Provider?
ACSS
Curious, wouldn't it be the other way around, with the IPO Part being almost always the same as the IPO Registers to the ASBCE and the ASBCE part be provider specific as it registers with the SIP Trunk Provider?
ACSS
The IPO doesn't register to the SBC.
Simply put the SBC rewrites and forwards the messages between IPO and SIP provider.
You could have the SBC handle registration which is done when the PBX can't do it, but in the IPOs case it's better to have all the in the IP Office so you see if the trunk goes down etc.
"Trying is the first step to failure..." - Homer
Simply put the SBC rewrites and forwards the messages between IPO and SIP provider.
You could have the SBC handle registration which is done when the PBX can't do it, but in the IPOs case it's better to have all the in the IP Office so you see if the trunk goes down etc.
"Trying is the first step to failure..." - Homer
- Thread starter
- #7
- Status
Similar threads
- Locked
- Question